Use reclaimed wood and DecoArt Media® Fluid Acrylics to create a quotable home décor piece for your home.

SUPPLIES

• sandpaper
• flat brush
• liner brush
• cosmetic sponge
• stencil brush
• stick-on rhinestones
• palette knife
• wood boards

INSTRUCTIONS

NOTES:

Allow paint to dry completely before continuing to the next step.

1. Cut reclaimed wood to the desired size and sand smooth with sandpaper. Use a large flat brush and a very small amount of Patina Green to add streaks onto the board. Use the flat brush with a very small amount of Titanium White to add streaks onto the board.

2. Position the Brocade Motif Stencil onto the left side of the board. Add a very small amount of Gold (Metallic) to a stencil brush and apply to the stencil. With Gold (Metallic), stencil the bracket from the Initial Impressions - Sleek Stencil into the upper right-hand corner of the board.
3. Position the Split Angles Stencil onto the bottom of the board. Mix a very small amount of Medium Grey Value 6 with White Modeling Paste. Use a palette knife to spread the mix inside the stencil and scrap off the excess. Remove the stencil and wash it immediately.

4. If necessary, place the remaining White Modeling Paste in a resealable container. Allow the Modeling Paste on the board to dry completely. Re-position the stencil to extend the angles to the end of the board.
5. Add dots of Carbon Black onto the angle shapes created in the Modeling Paste.

6. Transfer the text pattern onto the board. Use a liner brush with Titanium White to paint in the letters. Let dry. Once dry, stencil the opposite side bracket using Carbon Black. (Refer to photo)

7. Seal the board with a coat of Satin Varnish and add three adhesive backed rhinestones onto the gold brocade motif.

DOWNLOADS

RELATED PROJECTS